Loading... Please wait...

Popular Brands

Our Newsletter


Sort by:

Hydraulic Hose SAE

All types standard high pressure hydraulic hose with special specifications

Samway supply standard high pressure hydraulic hose including high-pressure hose 1SN, 2SN,  4SP, 4SH, R13 and R15.

They are used as flexible hoses in the hydraulic systems of machines and mechanisms for the transportation of mineral and hydraulic oil, fuel oil and water-oil emulsions. High pressure hydraulic hoses are also used in logging, road-construction, agricultural, mining and oil and gas industries.

The high pressure hose 1SN

Tube: oil resistant synthetic rubber
Reinforcement: one high tensile steel wire braid
Cover: synthetic rubber, abrasion resistant
Temperature range: -40°C to +100°C (+120°C max)

Inner diameter Outside diameter Operating pressure Burst pressure Bending radius weight
DN mm inch mm bar bar mm Kg/m
5 4.8 3/16 11.8 250 1000 90 0.196
6 6.4 1/4 13.4 225 900 100 0.226
8 8 5/16 15 215 850 115 0.265
10 9.5 3/8 17.4 180 720 130 0.335
12 12.7 1/2 20.6 160 640 180 0.415
16 16 5/8 23.7 130 520 200 0.496
19 19 3/4 27.7 105 420 240 0.638
25 25.4 1 35.6 88 350 300 0.980
32 31.8 1-1/4 43.5 63 250 420 1.207
38 38.1 1-1/2 50.6 50 200 500 1.560
51 50.8 2 64 40 160 630 2.108
The inner construction of standard high pressure hydraulic hose 1SN Standard high pressure hydraulic hose with double wire braid
High pressure hydraulic hose 1SN High pressure hydraulic hose 2SN

The high pressure hose 2SN

Tube: oil resistant synthetic rubber
Reinforcement: two high tensile steel wire braids
Cover: synthetic rubber, abrasion resistant
Temperature range: -40°C to +100°C (+120°C max)

Nominal specifications:

Inner diameter Outside diameter Operating pressure Burst pressure Bending radius weight
DN mm inch mm bar bar mm Kg/m
5 4.8 3/16 12.7 250 1000 90 0.210
6 6.4 1/4 15.9 225 900 100 0.300
8 7.9 5/16 17.5 215 850 115 0.350
10 9.5 3/8 19.8 180 720 130 0.430
12 12.7 1/2 23.0 160 640 180 0.540
16 15.9 5/8 26.2 130 520 200 0.640
19 19 3/4 20.2 105 420 240 0.800
25 25.4 1 38.1 88 350 300 1.170
32 31.8 1-1/4 46.0 63 250 420 1.450
38 38.1 1-1/2 52.4 50 200 500 1.770
51 50.8 2 66.7 40 160 630 2.505

The high pressure hydraulic hose 4SP and 4SH have the same inner construction

Tube: oil resistant synthetic rubber
Reinforcement: four helices high tensile steel wire
Cover: Synthetic rubber, abrasion resistant 
Operating temperature: -40 ° C to +100 ° C (+125 ° C max)

4SP Nominal specifications

Inner diameter Outside diameter Operating pressure Burst pressure Bending radius weight
DN mm inch mm bar bar mm Kg/m
6 6.4 1/4 17.8 450 1800 150 0.615
10 9.5 3/8 21.4 445 1780 180 0.850
12 12.7 1/2 24.6 415 1660 230 0.935
16 15.9 5/8 28.5 350 1440 250 1.146
19 19 3/4 32.1 350 1440 300 1.554
25 25.4 1 39.7 280 1120 340 2.033
32 31.8 1-1/4 50.8 210 840 460 3.176
38 38.1 1-1/2 57.1 185 740 560 3.657
51 50.8 2 70.6 165 660 660 5.137
Standard high pressure hydraulic hose 4SP construction Standard high pressure hydraulic hose R13 has six windings
High pressure hose with four layers of high tensile steel wire High pressure hoses with six windings

The high temperature hydraulic hose 4SH

This product can be used for hydraulic systems of ultrahigh pulsating pressure with high temperature working fluids for oil-based

Inner diameter Outside diameter Operating pressure Burst pressure Bending radius weight
DN mm inch mm bar bar mm Kg/m
19 19 3/4 32.2 450 1680 280 1.556
25 25.4 1 38.7 380 1520 340 2.087
32 31.8 1-1/4 45.5 325 1300 460 2.571
38 38.1 1-1/2 53.5 290 1160 560 3.439
51 50.8 2 68.1 250 1000 700 4.903

The high pressure hose R13 and R15 have the same inner construction

Tube: oil resistant synthetic rubber
Reinforcement: six layers of high tensile steel wire spirals 
Outer layer: synthetic rubber resistant to abrasion 
Temperature range: from -40 º C to +120 º C (+125 º C Max) 
Application: Hydraulic systems ultrahigh pulsating pressure with high temperature working fluids for oil-based

Specifications of high pressure hydraulic hose R13

Inner diameter Outside diameter Operating pressure Burst pressure Bending radius weight
DN mm inch mm bar bar mm Kg/m
6 6.4 1/4 16.7 776 3100 120 0.930
10 9.5 3/8 19.8 690 2760 150 1.100
12 12.7 1/2 23.1 512 2070 200 1.350
19 19.0 3/4 32.0 345 1380 240 1.65.
25 25.4 1 38.7 345 1380 300 2.250
32 31.8 1-1/4 49.8 345 1380 420 3.310
38 38.1 1-1/2 57.3 345 1380 500 4.950
51 50.8 2 71.1 345 1380 630 7.000

Specifications of R15

Inner diameter Outside diameter Operating pressure Burst pressure Bending radius weight
DN mm inch mm bar bar mm Kg/m
10 9.5 3/8 23.3 345 1655 150 0.770
12 12.7 1/2 26.8 345 1655 200 0.950
19 19 3/4 32.6 345

 

1920 240 1.650
25 25.4 1 39.2 345 1660 300 2.250
32 31.8 1-1/4 50.4 345 1520 420 3.895
38 38.1 1-1/2 57.9 345 1600 500 4.956
51 50.8 2 71.9 345 1500 630 7.087
Standard high pressure hydraulic hose of various length Stand high pressure hydraulic hoses with fittings
High pressure hydraulic hoses available in various sizes
 
Standard high pressure hydraulic hose used for mineral and hydraulic oil
 
Standard high pressure hydraulic hose with black cover surface Standard high pressure hydraulic hose in orange, black and silver
High pressure hydraulic hoses in black

Several types of hydraulic hoses

 Samway provide all types of hydraulic hose, industrial hose, as well as rubber hose, plastic hose, water hose , so please feel free to contact us if you have any request.

 


 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C.
Type A consists of an inner tube of oil-resistant synthetic rubber, a single wire braid reinforcement, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube or over the wire reinforcement (or both) to anchor the synthetic rubber to the wire.
Type AT has the same construction as Type A, except AT has a cover designed to assemble with fittings that do not require removal of the cover or any portion of it.

 

 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It consists of an inner tube of oil-resistant synthetic rubber, steel-wire reinforcement according to hose type, as detailed below, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.
Type A has two braids of wire reinforcement
Type B  has two spiral plies and one braid of reinforcement
Type AT is the same as Type A, but AT  has a cover designed to assemble with fittings that do not require removal of the cover or any portion of it.
Type BT is the same as Type B, but BT has a cover designed to assemble with fittings that do not require removal of the cover or any portion of it.

 

 

 

SAE 100R3 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It is constructed with an inner tube of oil-resistant synthetic rubber, two braids of suitable textile yarn, and an oil- and weather-resistant synthetic rubber cover.

 

 

 

SAE 100R4 hose should be used in low pressure and vacuum applications, with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It is constructed with an inner tube of oil-resistant synthetic rubber, a reinforcement consisting of a ply, or plies, of woven or braided textile fibers with a suitable spiral of body wire, and an oil- and weather-resistant synthetic rubber cover.

 

 

 

SAE 100R5 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It is constructed with an inner tube of oil-resistant synthetic rubber reinforced with two textile braids separated by a high-tensile-strength steel-wire braid. All of the braids are impregnated with an oil- and mildew-resistant synthetic rubber compound.

 

 

 

SAE 100R6 hose (above) should be used with petroleum- and water-based hydraulic fluids within a temperature range from140° to 100° C. It consists of an inner tube of oil-resistant synthetic rubber, one braided ply of suitable textile yarn, and an oil- and weather-resistant synthetic rubber cover.

 

 

 

SAE 100R7 thermoplastic hose (above) should be used for synthetic, petroleum-, and water-based hydraulic fluids in a temperature range from140° to 93° C. It consists of a thermoplastic inner tube resistant to hydraulic fluids with suitable synthetic-fiber reinforcement and a hydraulic fluid- and weather-resistant thermoplastic cover. Nonconductive 100R7 is identified with an orange cover and appropriate lay line. Its pressure capacity is similar to that of 100R1.

 

 

 

SAE 100R8 hose is high-pressure thermoplastic hose that should be used with synthetic, petroleum- and water-based hydraulic fluids within a temperature range from140° to 93° C. It consists of a thermoplastic inner tube resistant to hydraulic fluids with suitable synthetic-fiber reinforcement and a hydraulic fluid- and weather-resistant thermoplastic cover. Nonconductive 100R8 is identified with an orange cover and appropriate lay line. Its pressure capacity is similar to that of 100R2.

 

 

 

SAE 100R9 hose should be used with petroleum- and water-based hydraulic fluids within a temperature range from 140° to 100° C.

Type A consists of an inner tube of oil-resistant synthetic rubber, four spiral plies of wire wrapped in alternating directions, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.
Type AT has the same construction as Type A, but AT has a cover designed to assemble with fittings that do not require removal of the cover or any portion of it.

 

 

 

SAE 100R10 hose should be used with petroleum- and water-based hydraulic fluids within a temperature range from140° to 100° C.

Type A consists of an inner tube of oil-resistant synthetic rubber, four spiral plies of heavy wire wrapped in alternating directions, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.
Type AT has the same construction as Type A, but AT's cover is designed to assemble with fittings that do not require removal of the cover or any portion of it.

 

 

 

SAE 100R11 hose should be used with petroleum- and water-based hydraulic fluids within a temperature range from 140° to 100° C. It consists of an inner tube of oil-resistant synthetic rubber, six spiral plies of heavy wire wrapped in alternating directions, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.

 

 

 

SAE 100R12 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from 140° to 121° C. It consists of an inner tube of oil-resistant synthetic rubber, four spiral plies of heavy wire wrapped in alternating directions, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.

 

 

 

SAE 100R13 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from 140° to 121° C.  It is constructed with an inner tube of oil-resistant synthetic rubber, followed by multiple spiral plies of heavy wire wrapped in alternating directions, and concluding with an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.

 

 

 

SAE 100R14 hose should be used with petroleum-, synthetic-, and water-based hydraulic fluids within a temperature range from 154° to 204° C.
Type A consists of an inner tube of polytetrafluorethylene (PTFE) reinforced with a single braid of type 303XX stainless steel.
Type B has the same construction as Type A, but B  has the additional feature of an electrically-conductive inner surface to prevent buildup of an electrostatic charge.

 

 

 

SAE 100R15 hose should be used with petroleum-based hydraulic fluids within a temperature range from 140° to 121° C. It consists of an inner tube of oil-resistant synthetic rubber, multiple spiral plies of heavy wire wrapped in alternating directions, and an oil- and weather-resistant rubber cover. A ply, or braid, of suitable material may be used over or within the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.

 

 

 

SAE 100R16  hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It consists of an inner tube of oil-resistant synthetic rubber, steel wire reinforcement of one or two braids, and an oil-and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.

 

SAE 100R2

 

SAE 100R1 


 

SAE 100R1 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C.
Type A consists of an inner tube of oil-resistant synthetic rubber, a single wire braid reinforcement, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube or over the wire reinforcement (or both) to anchor the synthetic rubber to the wire.
Type AT has the same construction as Type A, except AT has a cover designed to assemble with fittings that do not require removal of the cover or any portion of it.

 

 

SAE 100R2 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It consists of an inner tube of oil-resistant synthetic rubber, steel-wire reinforcement according to hose type, as detailed below, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.
Type A has two braids of wire reinforcement
Type B  has two spiral plies and one braid of reinforcement
Type AT is the same as Type A, but AT  has a cover designed to assemble with fittings that do not require removal of the cover or any portion of it.
Type BT is the same as Type B, but BT has a cover designed to assemble with fittings that do not require removal of the cover or any portion of it.

 

 

 

SAE 100R3 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It is constructed with an inner tube of oil-resistant synthetic rubber, two braids of suitable textile yarn, and an oil- and weather-resistant synthetic rubber cover.

 

 

 

SAE 100R4 hose should be used in low pressure and vacuum applications, with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It is constructed with an inner tube of oil-resistant synthetic rubber, a reinforcement consisting of a ply, or plies, of woven or braided textile fibers with a suitable spiral of body wire, and an oil- and weather-resistant synthetic rubber cover.

 

 

 

SAE 100R5 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It is constructed with an inner tube of oil-resistant synthetic rubber reinforced with two textile braids separated by a high-tensile-strength steel-wire braid. All of the braids are impregnated with an oil- and mildew-resistant synthetic rubber compound.

 

 

 

SAE 100R6 hose (above) should be used with petroleum- and water-based hydraulic fluids within a temperature range from140° to 100° C. It consists of an inner tube of oil-resistant synthetic rubber, one braided ply of suitable textile yarn, and an oil- and weather-resistant synthetic rubber cover.

 

 

 

SAE 100R7 thermoplastic hose (above) should be used for synthetic, petroleum-, and water-based hydraulic fluids in a temperature range from140° to 93° C. It consists of a thermoplastic inner tube resistant to hydraulic fluids with suitable synthetic-fiber reinforcement and a hydraulic fluid- and weather-resistant thermoplastic cover. Nonconductive 100R7 is identified with an orange cover and appropriate lay line. Its pressure capacity is similar to that of 100R1.

 

 

 

SAE 100R8 hose is high-pressure thermoplastic hose that should be used with synthetic, petroleum- and water-based hydraulic fluids within a temperature range from140° to 93° C. It consists of a thermoplastic inner tube resistant to hydraulic fluids with suitable synthetic-fiber reinforcement and a hydraulic fluid- and weather-resistant thermoplastic cover. Nonconductive 100R8 is identified with an orange cover and appropriate lay line. Its pressure capacity is similar to that of 100R2.

 

 

 

SAE 100R9 hose should be used with petroleum- and water-based hydraulic fluids within a temperature range from 140° to 100° C.

Type A consists of an inner tube of oil-resistant synthetic rubber, four spiral plies of wire wrapped in alternating directions, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.
Type AT has the same construction as Type A, but AT has a cover designed to assemble with fittings that do not require removal of the cover or any portion of it.

 

 

 

SAE 100R10 hose should be used with petroleum- and water-based hydraulic fluids within a temperature range from140° to 100° C.

Type A consists of an inner tube of oil-resistant synthetic rubber, four spiral plies of heavy wire wrapped in alternating directions, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.
Type AT has the same construction as Type A, but AT's cover is designed to assemble with fittings that do not require removal of the cover or any portion of it.

 

 

 

SAE 100R11 hose should be used with petroleum- and water-based hydraulic fluids within a temperature range from 140° to 100° C. It consists of an inner tube of oil-resistant synthetic rubber, six spiral plies of heavy wire wrapped in alternating directions, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.

 

 

 

SAE 100R12 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from 140° to 121° C. It consists of an inner tube of oil-resistant synthetic rubber, four spiral plies of heavy wire wrapped in alternating directions, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.

 

 

 

SAE 100R13 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from 140° to 121° C.  It is constructed with an inner tube of oil-resistant synthetic rubber, followed by multiple spiral plies of heavy wire wrapped in alternating directions, and concluding with an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.

 

 

 

SAE 100R14 hose should be used with petroleum-, synthetic-, and water-based hydraulic fluids within a temperature range from 154° to 204° C.
Type A consists of an inner tube of polytetrafluorethylene (PTFE) reinforced with a single braid of type 303XX stainless steel.
Type B has the same construction as Type A, but B  has the additional feature of an electrically-conductive inner surface to prevent buildup of an electrostatic charge.

 

 

 

SAE 100R15 hose should be used with petroleum-based hydraulic fluids within a temperature range from 140° to 121° C. It consists of an inner tube of oil-resistant synthetic rubber, multiple spiral plies of heavy wire wrapped in alternating directions, and an oil- and weather-resistant rubber cover. A ply, or braid, of suitable material may be used over or within the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.

 

 

 

SAE 100R16  hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It consists of an inner tube of oil-resistant synthetic rubber, steel wire reinforcement of one or two braids, and an oil-and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.